Spill Shield International

OILY WATER SCRUBBERS

Scrubber 55
P/N 70105

Scrubber Tote
P/N 70180

The Absorbent W water scrubbing system is designed to remove hydrocarbons from wastewater.

This system is the most cost-effective way known to quickly and efficiently remove hydrocarbons from water. Simply pour the oil-water mixture in the top and within seconds, clear water is coming out the bottom.

In repeated tests with diesel, motor oils and gasoline at initial hydrocarbon levels of 30,000 to over 250,000 ppm, the water scrubber removed over 99.9% of the hydrocarbons in one quick pass. (test data available upon request)

The water scrubber's performance is based on Absorbent W's unique ability to absorb oil while repelling water. Absorbent W is a natural fiber cellulose material that selectively absorbs and retains hydrocarbons.

Water scrubbers remove oil from water for a fraction of the cost of other removal systems such as mechanical oil water separators. The light natural filter (Absorbent W) can also be disposed of by incineration in the Smart Ash incinerator if the flash point of the oils absorbed exceeds 100° F.

The scrubbers come in two standard sizes and are made in Alaska. Custom systems can also be designed for specific applications.

Both scrubbers will handle flow rates of up to 600 gals/hr. Time intervals between filter media changes will vary depending on the viscosity of the oil and the ppm contamination of the water.


	Spill Shield International P.O. Box 186 Willow, AK 99688 (907) 495-5343 Fax (907) 495-5300

HOME / ABOUT US / PRODUCTS / CONTACT US