Model 100A

SmartAsh is an innovative combustion system that meets EPA requirements for burning non-hazardous refuse. Simply load a 55 gallon (208 liter) open head steel drum, light the load and clamp on the lid. A whirlwind of fire and intense heat is created inside the drum, burning refuse without smoke or smell. Combustion is complete, leaving 3% ash.

Thousands of satisfied customers are currently using SmartAsh around the world to eliminate a wide variety of burnable waste materials.

This innovative little incinerator can be shipped by parcel post. The SmartAsh can be used with or without fuel. For dry loads that support combustion, SmartAsh incinerates waste with incredible efficiency. For loads having a moisture content above 15%, the SmartAsh with OilAway Attachment provides a unique fuel injection system that allows the incineration of a large variety of refuse and waste materials. SmartAsh with the OilAway Attachment also eliminates waste oil at rates up to 6 gallons/hr. (23 L). Available in 110 volt and 220 volt versions.

Oil Away is designed to incinerate free-standing oil while working in concert with the Smart Ash. It is attached to the drum used as the burn chamber for the Smart Ash. About 6 gal/hr of oil can be burned and the Smart Ash can be used for an indefinite period of time when the Oil Away is attached to the burn chamber.

The OilAway Attachment is an accessory for the SmartAsh Cyclonic Barrel Burner that injects waste oil into the barrel during the burn cycle. This allows the SmartAsh to burn “wet” loads typically not burnable in the SmartAsh.

The Document Burner is an insert that fits into the oil druml. This insert insures complete incineration of paper products and important documents when no other high BTU material is added.

Model 10A
   

Model 1000A

Smart Heat is more than a furnace, it is an environmentally intelligent way to burn used absorbent materials on-site and to generate "free heat" at the same time. It's the smart solution for the disposal of oily absorbents, rags, and filters safely, legally, and economically.

Saves Money and Worry! - SmartHeat eliminates waste management costs and worry over long term and second-person contamination liability. On-site burning of used absorbents is a "free fuel" creating a cost-saving auxiliary heat source for your facility.

SmartHeat is easy to operate - simply load the SmartAsh with oily waste, ignite, and clamp on the lid. Switch on SmartHeats' 1000 cfm blower. Vented to ambient air, SmartHeat pulls cool air from inside the building, forces it through the exterior heat exchanger (located above SmartAsh ), and returns heated air to assist in warming the facility. The super-heated air provides up to 400,000 Btu per hour of auxiliary "Free Heat".

EPA Approval;
Elastec's SmartHeat energy recovery furnace complies with the latest EPA ruling, 40 CFR#266.41 and new management standards 40 CFR#279.10 (c), regulating the on-site burning of materials contaminated with oil.